TOPA0110   Top Flite   P-51D Mustang Gold Edition Kit .60-.90,65" 

TECH NOTES
  Top Flite's Gold Edition P-51D combines Easy Construction with Scale Fighter
Looks.

FEATURES: Realistic scale details: Vacuum-Formed Canopy with Molded-In Relief
            Detail and Vacuum-Formed Exhaust Ports, Machine Gun Exits and Cowl-
            Halves molded from ABS are accurately reproduced and make it easy
            for the average modeler to achieve stunning results.
          The same Fine Quality Materials, Simplified Construction Methods
            and step-by-step Instructions as all Gold Edition kits.
          Two-piece, Molded Oil-Cooler Scoop seams on the centerline and has
            a die-cut internal structure for a very close to scale appearance.
          Two huge sheets of excellent, high quality decals included for "Big
            Beautiful Doll" scheme (but does NOT include the checkerboard
            cowl decal).
          Fuselage has a very accurate, exact scale outline with scale tail-
            wheel location.
          Fully-Sheeted Fully-Symmetrical Wing w/Excellent Flight Performance.

INCLUDES: All Balsa and Plywood to Complete the kit, Clear Canopy, ABS Cowling
            and Detailing parts, Wire Landing Gear, Decals, Illustrated
            Instruction Manual, CAD-produced Rolled Plans, Pushrods, and
            Hardware.

REQUIRES: .60-.90 (2-stroke) or .90-1.20 (4-stroke) Engine
          4-6 Channel Radio (5th & 6th channels for retracts and/or flaps)
          4-7 Servos
          Engine Mount, Fuel Tank, 4" Spinner, 3-1/4"-4" Main Wheels, 1-1/4"
            Tailwheel, Wheel Collars, Fuel Tubing, Foam Rubber, Building and
            Field Equipment
          Two Rolls of Covering (plus trim colors)

SPECS:    Wingspan:  65"            CG: 3-7/8" back from Leading Edge Break
          Wing Area: 734 sq inches     (LE break is point where LE goes from
          Weight:    8-10 lbs          steep sweep near fuse to shallow angle)
          Length:    56.5"          (throws are listed below:)
          Wing Loading: 25 to 30 ounces per square foot                       .
          Degrees Incidence: Engine Thrust:  1.75 down,  1.6 right
                             Stabilizer:     0
                             Wing:           0.5
          Control Throws-                     High        Low
                             Elevator:       11/16"      7/16"
                             Rudder:         1-1/8"      7/8"
                             Ailerons:       11/16"      1/2"
                             Flaps:          1-1/16"     1-11/16"

COMMENTS: For Optional items use the following:  *see below for long struts*
            Robart Pneumatic Retracts, use #605.
            Air Control Kit for Robart Retracts, use #188.
            Robart Hinge Points for the flaps, use #309.
            Robart Robostruts for landing gear, use #1705L & #1705R.
            Pilot Figure (1/7 scale or 2" size) TOPQ9000.
            See Accessories Needed for additional items.
            See below for notes on cockpit kit.
          Cockpit Note: Unfortunately the tooling and design costs to make the
            engineering changes to the fuselage are prohibitive for the
            adaptation of a cockpit kit.
            As such, there is no cockpit/interior kit available for this model
            at this time.                                   Per RTJ-PM,1999 AMC
          Though, a .90 size engine will fit into this plane there is no
            in-cowl muffler that will work with a .90.                 
                                                                   
          Decal sheet P516D01 sold only through GP Manufacturing includes:
            Two 15" x 3-3/4" black & red WZ1
            9" x 2" black & red Big Beautiful Doll
            2-3/4" x 7/8" Col. J.D. Landers
            1-3/4" x 3/4" black & white crew listing
            4-5/8" x 2-1/8" instrument panel
            Five 3/8" x 1/2" red & white "Rising Sun" kills
            30 3/8" x 1/2" red, white & black Swastika kills
            Two 3-1/4" x 7/8" black 472218
            Two 7/8" white & black fuel inlets
            2-1/4" x 5/8" black air intake
            1" red & white circle
            1/8" black block letters:
              Caution! Replace Cover, Amo Can Access, Gun Access (2), Aileron
              Servo Access, Aux. Equip. Access, Lockout Valve, Tie Down,
              Control Access, No Step (4), No Push (4).
            1/16" black block letters:
              No Push (4), No Step (4).
          Decal sheet P516D02 sold only through GP Manufacturing includes:
            Two 9-1/8" x 4-3/8" blue & white stars and bars
            Two 12-1/8" x 6" blue & white stars and bars
                             

ACCESSORIES
KIT IS CONSTRUCTED OF BALSA AND PLYWOOD AND REQUIRES A .60-.90 2 STROKE OR .90-
1.20 4 STROKE ENGINE, 4-6 CHANNEL RADIO (5TH & 6TH CHANNELS FOR RETRACTS AND OR
FLAPS), 2 ROLLS OF COVERING (MODELER'S CHOICE), WHEELS, FUEL TANK, ENGINE MOUNT,
PROP AND MISCELLANEOUS BUILDING AND FIELD EQUIPMENT. KIT IS UNASSEMBLED.
RETRACTS ARE LISTED IN THE OPTIONALS SECTION OF THIS GUIDE.

|  Return To R/c Airplanes  |  General Hobby Catalog  |  Search  |