TOPQ0510   MonoKote Flat Olive Drab 6'

TECH NOTES
MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive,
   Easy, Clean, and When Compared to "old fashioned" Coverings, Quick To Use.

     For great covering ideas and to insure a professional finish, order
             the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES: Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
          Lightweight at Only 0.2 oz/sq ft
          Dry Adhesive Activates When Heat is Applied
          Shrinks to a Drum-Tight Finish As It Cools
          High Gloss Finish
          Fuelproof and Waterproof
          Stronger and Lighter Than Traditional Silk and Dope Coverings
          May be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

INCLUDES: One (6' x 26") Roll of Flat Olive Drab Covering w/Instruction Sheet

REQUIRES: Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

COMMENTS: Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May
            Vary Slightly In Color Between Production Runs of These Products.
          If Using Three or More Rolls of the Same Color, it is Suggested to
            Use a 25' Roll (TOPQ1520) To Ensure the Same Dye Lot for the Entire
            Model Being Covered.
          LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its
            True Color.
          LustreKote Flat Clear:       TOPR7199
          LustreKote Paint (Gloss):    TOPR7210
          MonoKote Trim Sheet (Gloss): NONE
          MonoKote (Gloss):            TOPQ0210
          MonoKote is a High Temperature Covering, NOT For Use Directly On Foam
          EconoKote IS For Use Directly On Foam, Use the Following:
          EconoKote Covering:  TOPQ2601-TOPQ2612
            (EconoKote may be used on top of, but not under MonoKote.)
        **Temperature Ranges: Flat MonoKote Uses a Higher Temperature to Apply.
            Attaching to Wood:  240 - 275 degrees F (activating the glue)
            Partial Shrinkage:  230 - 270 degrees F
            Maximum Shrinkage:  270 - 350 degrees F
                                                                         
TECH NOTE: The characteristics of the flat MonoKote differ slightly from
           standared MonoKote covering:
           Flat MonoKote requires higher temperatures to apply than standard
           MonoKote because of the flat finish. In addition to the higher temp
           settings, this covering may require the iron to be in contact with
           the covering and wood slightly longer than the standard finish.
           If this covering is applied too loosely, it may be difficult to get
           a tight shrink with this product. Also, when applied loosely, it
           could become impossible to remove any wrinkles that may appear.

                                                        
ACCESSORIES
THIS IS A 6' X 26" ROLL OF FLAT MONOKOTE COVERING.
  THE FLAT MONOKOTES WILL REQUIRE SLIGHTLY HIGHER HEAT SETTINGS.
REQUIRES: SEALING IRON, HOBBY KNIFE, METAL STRAIGHT EDGE, SCISSORS, PANEL PEN.
NOTE: THE COVERING ACCESSORY ASSORTMENT TOPR2900 CONTAINS MOST TOOLS NEEDED TO
 GET STARTED. TOOLS IN ASSORTMENT ARE LISTED SEPARATELY IN #4 OPTIONALS.

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |