TOPR7505   Top Flite   LustreKote 10 oz. Spray Jet White 

TECH NOTES
     LustreKote model paint is a high gloss, fuelproof paint specially
             formulated to match Top Flite MonoKote covering.

FEATURES: Can be used on balsa, plywood, fiberglass, aluminum, ABS plastic,
            butyrate and MonoKote.
          Tough, lightweight and fuelproof (up to 15% raw nitro, any spent
            fuel), stands up to years of nitro and gasoline exposure.
          Acrylic Lacquer based formula offers the same high-gloss shine as
            MonoKote covering.

INCLUDES:  One 10oz can of Jet White spray paint

COMMENTS: LUSTREKOTE IS NOT SAFE FOR FOAM
          LUSTREKOTE IS NOT COMPATIBLE WITH ANY OTHER PAINT!!!
          In order for a true match to Monokote, LustreKote primer (TOPR7801)
            must be used as a base under the LustreKote paint (except when
            used on MonoKote).

    LustreKote MAY be used on butyrate, but ONLY in VERY, VERY thin layers.
     Applying LustreKote too heavily will cause the butyrate (canopies, etc.)
     to deform.  Also, the combination of masking liquid (like Hobbico Master
     Mask) and LustreKote (ANY amount) will damage butyrate!  For best results,
     mask off butyrate with LustreKote Masking Tape TOPR8018.
   The matching MonoKote covering is TOPQ0204.
   The matching EconoKote covering is TOPQ2604.
   The matching MonoKote trim sheet is TOPQ4104.
           When applying over monokote, lightly sand off shine with a 320-400
             grit sandpaper, clean surface with alcohol and allow to dry.
             Apply in thin coats.

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |