|
Traxxas |
Hobbies R Us |
Traxxas |
|
|
TRA4310 Traxxas 4-Tec 4WD RTR w/Radio
TECH NOTES
This is the Traxxas 1/10th scale 4-Tec 4-wheel drive Ready-to-Run Sedan
with a 2-Door Pre-Painted body, Rear Wing and TQ Traxxas Radio System.
Pre-Painted Five Color Bodies: TRAC01A2-(Silver front; Yellow, Orange and Red hood flames; Red rear) TRAC01A4-(Silver front; Yellow, Orange and Red hood flames; Black rear) TRAC01A5-(Silver front; Yellow, Orange and Red hood flames; Hot Pink rear) TRAC01A6-(Silver front; Yellow, Orange and Red hood flames; Blue rear)
FEATURES: Mostly assembled
2 (Dual) belt 4 wheel drive system
Black plastic oil-filled Ultra shocks with quick adjust collars
Front and rear wishbone suspension
Black fiber-composite tub chassis with countersunk holes
Adjustable front toe-in/out, camber, caster
Adjustable rear toe-in and camber
Telescoping u-joint sliding shafts front and rear
Wide black front bumper
Front and rear ball differentials
Quick-change battery holder for stick or side-by-side batteries
Chrome 3-spoke (1" standard narrow) 1-piece wheels
Rubber slick tires (foam inserts not included)
Adjustable body mounting posts
Black composite plastic front and rear shock towers
Bellcrank-type steering
Quick adjust black plastic shock spring adjusters
Gearbox is open behind differentials to let out possible
debris in gearbox
Black plastic composite upper chassis plate with built-in
belt protector .
Adjustable rear shock mount and rear camber mount positions
INCLUDES: Four chrome 3-spoke type wheels, rubber slick tires, black
84 tooth 48 pitch spur gear, 28 tooth 48 pitch pinion gear,
oil shocks, chrome springs, black composite plastic chassis
and upper deck (plate), bushings and ball bearings, black composite
motor plate, large servo saver, pre-painted lexan body, wing,
decals, instructions, rotary speed control with standard battery
and bullet motor connectors and TQ pistol radio with 2 2018 servos
SPECS: Fits 190mm width bodies
Length: 17.6"
Track: front 6.8" rear 7"
Wheelbase: 10.1"
Height: 4.375" (111mm)
Gear ratio: 6:1 to 11.07:1
Weight: 46 ounces with-out battery
Wheels: 1.9" (47.5mm) diameter,
1.0" (26mm) width standard narrow touring car
Motor: 20 turn Stinger mid-mounted (closed end bell)
Speed control: Mechanical rotary forward and reverse
Drive system: Dual belt, all-wheel drive
Differential: Adjustable ball differential (front and rear)
Chassis: Dual plane composite plastic w/counter-sunk holes
Rear toe-in: 1.5 degrees
Pinion gear: 28 tooth 48 pitch
Spur gear: 84 tooth 48 pitch
REQUIRES: 6-cell stick (flat or side-by-side) battery (7-cells will
not work), 8 "AA" batteries, charger,
Assembling body mounts, glueing tires
COMMENTS: Also available in kit version with-out radio system TRAC0043
Kit includes: (12) 5x11mm & (4) 5x8mm bushings & (2) 5x11 bearings
For ball bearings use: (14) 5x11x4mm and (4) 5x8x2.5mm
The wheels go on a 12mm wide hex drive washer that is compatible
with the Kyosho, HPI, and Tamiya touring car wheels
There is no slipper clutch with this kit
This can use 190mm wide touring (sedan) car type bodies
A substitution for this kit would be the Associated RC10 TC3 RTR
Touring Car (ASCC3045). It has an electronic speed control and full
ball bearings.
ACCESSORIES THIS IS A READY TO RUN 4-WHEEL DRIVE 1/10TH SCALE TOURING CAR. INCLUDES FIBER CHASSIS, PLASTIC OIL SHOCKS, DUAL BELT DRIVE, RUBBER SLICK TIRES, 48 PITCH 20T PINION AND 84 T SPUR GEAR, 20 TURN STINGER MOTOR, MECHANICAL SPEED CONTROL, 2 STANDARD SERVOS, TQ PISTOL GRIP RADIO SYSTEM AND CLEAR LEXAN BODY.
REQUIRES 6-CELL BATTERY, 8 "AA" BATTERIES, CHARGER, KNIFE, PAINT AND GLUE.
|
Additional Items Required |
HCAP0125 |
DTXC2100 |
 FUG7300 AA Batteries (2 Packs Required) |
|
| On-Road Nitro | Off-Road Nitro | On-Road Electric | Off-Road Electric | Search |