TRA3608   Stampede VXL RTR

TECH NOTES
This is the 1/10 scale radio controlled, ready to run
Traxxas Stampede VXL Brushless Motor Powered Off-Road Monster Truck
For ages 8 and above.

Equipped with the Velineon Extreme Brushless Power System consisting of;
Traxxas High Current Connector
Maxx Cable 12 Gauge Wire
Velineon 3500 Brushless Motor
Velineon VXL-3s Fwd/Rev/Brake Electronic Speed Control

**Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Chassis: Fiber composite tub 0.08" (2mm) thick, gray in color
Drive: Rear wheel
Motor Traxxas Velineon 3500 brushless
Radio: Traxxas TQ              with steering and throttle
trim and reverse, throttle neutral adjust and digital high torque
steering servo
Shocks: Oil-filled plastic bodied, tunable and rebuildable
Gearbox: Closed
Body: Painted with decals pre-applied
Differential: Maintenance free, planetary gear type with hardened
steel internal gears
Transmission: Single speed, Traxxas Magnum 272 with ball bearings,
hardened steel gears and Revo spec Torque-Control slipper clutch
with semi-metallic pads and heat dissipating finned aluminum
alloy pressure plates for smooth linear engagement and consistent
traction control
Ball Bearings:
Tires: Talon 2.8" (71mm) wide, 5" (127mm) diameter with foam inserts
Wheels: All Star 5-spoke black 2.8" (71mm) wide, 2.75" (70mm)
diameter
Speed Control: Traxxas Velineon VXL-3s forward/reverse/brake
Bumper: Front plastic kickup type, black in color
Camber Tie Rods:
Steering Tie Rods: Adjustable, Jato style steel turnbuckles
Steering: Bell-crank type with servo saver, new design front spindles
with 5x11mm rubber-sealed ball bearings

INCLUDES: Traxxas Stampede VXL with oil-filled shocks, Velineon 3500 brushless
motor, Velineon VXL-3s electronic speed control, painted
body, tires, foam inserts,
-- tooth and -- tooth pinion gears, -- tooth spur gear,
radio with high-torque digital servo, illustrated instruction
manual

REQUIRES: Radio Batteries: Eight AA size for transmitter
Battery:
Charger:
Misc. Items: Building and track equipment

SPECS:      VEHICLE-
Length:    16.25" (413mm)
Width:     13"    (330mm)
Height:      9.5" (241mm)
Weight:   2.98lbs (1355g) approx.
Wheelbase: 10.75" (273mm)
Front and Rear Tread: 10.5" (266mm) side-to-side at wheel centers
Front and Rear Track: 12.75" (324mm) side-to-side at wheel edges
Ground Clearance: 2.4" (60mm)
Gear Ratio:
Tires-Front and Rear: 2.8" (71mm) wide, 5" (127mm) diameter
BODY-
Length:   16" (406mm)
Width:     6.3" (160mm) at rear wheels (widest point)
5.5" (141mm) behind from wheels (thinnest point)
Height:    4.3" (109mm)

COMMENTS: For Replacement Ball Bearings and to Upgrade From Bushings Use:
Qty.  Size      Location              Qty.    Bearing Set
4   5x8mm     Front Wheels            2       DTXC1523
4   5x8mm     Rear Wheels             2       DTXC1523
4   5x11mm    Transmission            2       DTXC1547
1   5x11mm    Spur Gear               2       DTXC1547