TRA5509   Jato 3.3 RTR

| Video 1 | Video 2 |

| Parts List | Accessories |

| Optional Parts |

                Exploded Views
    
           | Front Assembly | Rear & Shock Assy | Chassis |

 | Tran & Easy Start System | 3.3 Engine | Down Load Adobe Reader |

TRA5509A2-(Body is multi-colored and primarily red)
  TRA5509A4-(Body is multi-colored and primarily black)
      TRA5509A5-(Body is multi-colored and primarily gun-metal)
 TRA5509A6-(Body is multi-colored and primarily blue)

TECH NOTES
     This is the radio controlled, glow powered, 1/10 scale, Ready-To-Run
                      Traxxas Jato 3.3 Stadium Truck.
              New features different from the 2.5 Jato include;
                             3.3 Racing Engine
                Resonator Blue Anodized Aluminum Tuned Pipe
                2.8" (71mm) wide Anaconda Performance Tires
               Front & Rear Sway Bars for Increased Stability

    **Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Chassis: 1.16" (3mm) thick 6061 T6 aluminum, blue-anodized, fully
            countersunk with buggy style mud guards, and choice of
            receiver pack placement-between the engine and fuel tank
            or in the rear compartment
          Drive Type: Two wheel with universal joint axles with dust boots
            operate at the most extreme deflection angles to allow for the most
            suspension travel
          Engine: Traxxas .20 cu in (3.3cc) racing engine w/slide valve
            carburetor, 12mm diameter IPS crankshaft, foam air filter,
            blue anodized aluminum tuned pipe, EZ-Start push-button electric
            starter, 60% more peak horsepower than the TRX 2.5 engine
          Radio: Traxxas 2-channel 27MHz AM TQ pistol grip w/ trims
          Shocks: Four oil filled precision GTR Revo-style with threaded
            composite shock bodies
          Wheels:   " (  mm) diameter,   " (  mm) wide chrome finish
          Ball Bearings: Full set, rubber sealed
          Tires: Pre-glued Anaconda with horizontal bead design 3.93"
            (100mm) diameter, 2.8" (71mm) wide
          Body: Pre-colored Lexan racing truck style with decals applied,
             available in 4 different color schemes depending on radio channel
             choice
          Gearbox: Sealed Revo-style silicone filled, with heavy-duty slipper
             clutch constructed of semi-metallic friction material and finned
             aluminum alloy pressure plates, spur gears can be removed and
             replaced without altering slipper adjustment
          Brake: Semi-metallic brake disc with steel pads eliminate fade caused
            by heat buildup
          Transmission: Internal, adjustable 2-speed with Torque Control
            slipper clutch
          Gear Differential: Sealed, limited slip, fully tunable with silicon
            shock oils
          Steering: Angled steering bellcranks for zero bump steer
          Clutch: 2-shoe
          Suspension: Fully adjustable including roll centers, anti-squat
            and rear toe, ride height and weight bias also features 30° caster
            blocks with 25° option and captured, hardened-steel hingepins and
            captured double sheer rod ends
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when when viewed from front or behind vehicle
          Fuel Tank: 2.5 oz (75cc) flip top with remote fingertip pull

INCLUDES: One pre-built Jato 3.3 truck, pre-painted lexan body, owners
            manual,              registration card, EZ Start handheld
            unit, extra air filter and oil, tool set, wheelie bar
            DVD operators guide, 2-channel AM transmitter, antenna tube and
            mount, extra body clips

REQUIRES: Fuel: Traxxas 10%-20% Top Fuel
          Batteries: 12 AA for transmitter and receiver, 7.2V stick pack for
            electric starter
          Charger: For 7.2V stick pack
          Building and field equipment

SPECS:      Vehicle-
          Length: 16.53" (420mm)
          Width:  12.87" (327mm) at front wheels
          Height:  5.70" (145mm)
          Wheelbase: Long, 11.22" (285) Short, 11.14" (283mm)
          Tread-Front:  10.6"     (270mm)
                Rear:   10.6"     (270mm) wheels on-center side-to-side
          Track-Front:  12.87"    (327mm)
                Rear:   13"       (330mm)
          Weight: 4.72lb (75.6oz) RTR, without fuel
          Front Tires:
          Rear Tires:
          Wheels:
          Total Gear Reduction:

COMMENTS:

          For replacement bearings order:
            Qty.   Size        Location       Qty Bearing Set
             4     5x11mm      F.wheels        2   DTXC1553
             2     5x11mm      R.wheels        1   DTXC1553
             2    10x15mm      R.wheels        1   DTXC1595
             5     5x11mm      Transmission    3   DTXC1553
             3    10x15mm      Transmission    2   DTXC1595
*Optional    4     4x7mm       Steering        2   DTXC1507
*Optional    2     5x8mm       Brake Bellcrank 1   DTXC1523