Jato  

Traxxas Lifetime Engine
Replacement Plan

• Exchange a worn out Traxxas engine for a brand new TRX® Racing Engine; it’s an affordable, convenient, no-questions-asked program.
• Exchanges can be made in your local hobby shop or directly through Traxxas.
• It’s less expensive than rebuilding the engine with separate parts.
• Know that it’s done right. Traxxas replacement engines are brand new (not refurbished) for factory-fresh performance.
• The program uses our top-of-the-line TRX Racing Engine for all exchanges.

Learn More About it!


#5186





#5185
 Machined Aluminum Ball Bearing Wheels with Rubber Tires: Traxxas now offers an impressive set of red-anodized machined aluminum wheelie bar wheels with rubber tires. The precision 6061-T6 aluminum wheels feature a stunning red-anodized finish and they ride on rubber-sealed 5x8mm ball bearings. For controllable and seemingly never-ending wheelies, Traxxas developed a durable, soft compound rubber tire that reduces side-to-side movement for stable, consistent wheelies. The rubber tires are available separately and they also install on the stock nylon wheels.

Part #5186 Rubber Tires Mounted on Red-Anodized Wheelie Bar Wheels (2)/ 5x8mm Ball Bearings (4)/ Axles (2)
Suggested retail price $19.95

Part #5185 Rubber Tires for Traxxas Wheelie Bar Wheels (2)
Suggested retail price $7.00
Titanium-Anodized Aluminum Jato Chassis: The titanium-anodized aluminum chassis for Jato is machined from the highest grade 7075-T6 aluminum alloy to make it more than 40% stronger than the stock Jato chassis. Extra material is removed from the top of the chassis to reduce the weight by 10% compared to the stock chassis. The chassis is fully countersunk on the bottom for a smooth, snag-free finish.

Part #5522X Titanium-Anodized 7075-T6 Aluminum Jato Chassis

Suggested retail price $49.95
TRX POWER CHARGER: The TRX Power Charger, makes fast charging (in about an hour) as simple as just plugging it in. Peak detection ensures a perfect charge, everytime. For use with Traxxas RX Power Packs. Now charges your 7.2V EZ-Start battery!

Part #3030X TRX Power Charger, peak detecting/ AC adapter (for charging NiCad or NiMH 5-cell receiver packs and 6-cell (7.2V) EZ-Start packs) (includes plug adapter for 7.2V packs)
Suggested retail price $40.00
DC POWER ADAPTER: Plug this DC power adapter into any 12V automotive auxiliary power socket and you can operate your TRX Power Charger in the field. The 48” power cord allows safe charging outside of the vehicle. The built-in fuse protects against short circuits.

Part #3032 DC Power adapter
Suggested retail price $7.50
NiMH RECEIVER PACK: This high quality five-cell receiver battery pack uses proven Gold Peak cells and is rated at 1100 mAh. Fully charged, it provides about 1-2 hours of run time. Heavy-duty wiring provides efficient current transfer and extra protection against damage.

Part #3036 Battery, RX Power Pack (5-cell flat style)
Suggested retail price $30.00
Resonator™ Dyno-Tuned Performance Pipes for Jato: Traxxas Resonator aluminum tuned pipes are precision-engineered on the dyno to increase the power output of TRX Racing Engines. The Traxxas engineering team knows TRX Racing Engines better than anyone, so Resonator pipes deliver proven results that drivers can see, hear, and feel every time they pull the trigger. Resonator pipes for Jato feature R.O.A.R. legal stingers and come in single and dual-chamber versions. It’s smooth power delivery is perfect for the race track. All Resonator pipes are fully polished to a beautiful mirror-chrome finish with a laser etched logo. Mounting hardware is included.

Part #5483 Tuned pipe, Resonator, R.O.A.R. legal (aluminum, single-chamber, enhances low to mid-rpm engine power) bright polished finish. includes pressure fitting/ 4mm GS (for TRX Racing Engines)
Suggested retail price $50.00

Part #5485 Tuned pipe, Resonator, R.O.A.R. legal (aluminum, dual-chamber, maximum mid to high-rpm engine power) bright polished finish. includes pressure fitting/ 4mm GS (for TRX Racing Engines) Suggested retail price $55.00
MOLDED PIPE COUPLER

Part #5245: Pipe coupler, molded (blue)/ exhaust deflecter (rubber, blue)/ cable ties, long (2)/ cable ties, short (2)
Suggested retail price $4.00


#5563


#5569

ALIAS™ AND RIBBED TIRES: Alias and ribbed super soft rubber compound tires feature a non-directional design for no-worry mounting. The ribbed front tire incorporates deep grooved ribs that dig into soft loamy surfaces for superior control. Alias rear tires integrate a rounded carcass and dual pin design that steps-up to keep the tires firmly planted on extreme offroad terrain. Get more info here in the Traxxas 2.8" Tire & Wheel Guide.

Part #5563 Ribbed front 2.8" tires with foam inserts (2)
Suggested retail price $20.00

Part #5569 Alias 2.8" tires with foam inserts (rear) (2)
Suggested retail price $20.00

TALON™ 2.8" TIRES: The Traxxas 2.8" Talon tires are the most versatile all-terrain tires available for your Traxxas model. The directional long-wear tread pattern provides extended tire life, while providing exceptional traction on most any surface. The 2.8" Talon integrates a soft rubber compound, large foam inserts, and a go-anywhere design that allows it to excel on asphalt as well as rocks, grass, dirt, or any other surface. The tapered tread design where the treads meet the sidewall enables the tire to slide on asphalt, to help avoid unwanted traction rolls. Increase the ride height and ground clearance of any Traxxas stadium truck by adding a set 2.8" Talon tires. Get more info here in the Traxxas 2.8" Tire & Wheel Guide.

** When using 2.8" Talon tires on Nitro Sport, Nitro Rustler, or Jato/3.3 use a clutch bell that is 2-4 teeth smaller than stock. When using 2.8" Talon tires on the electric Rustler use a pinion gear that is 4-5 teeth smaller than stock.

Part #3671 Talon 2.8" Tires with Foam Inserts (front/rear) (2)
Suggested retail price $20.00


#5573


#5575


#5571


#5570


 Victory™ 2.8" Racing Tires: Victory tires are 2.8-inch mounted and pre-glued tires with low sidewall heights for performance. Special foam inserts maintain tire shape and firmness for superior traction. Get more info here in the Traxxas 2.8" Tire & Wheel Guide.

Part #5573
Victory Rear Tires Mounted
and Pre-Glued on Twin-Spoke 2.8" Wheels
Suggested retail price $28.00

Part #5575
Victory Front Tires Mounted
and Pre-Glued on Twin-Spoke 2.8" Wheels
Suggested retail price $28.00

Part #5571
Victory 2.8" Front Tires (2)
Suggested retail price $17.50

Part #5570
Victory 2.8" Rear Tires (2)
Suggested retail price $17.50

TWIN-SPOKE™ 2.8" WHEELS: Twin-Spoke wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design features a brilliant mirror-chrome face and a natural nylon bead for fast, easy tire gluing. The horizontal bead helps grab the tire, reducing the stress placed on the glue joint by tire expansion. Get more info here in the Traxxas 2.8" Tire & Wheel Guide.

Part #5574 Twin-Spoke 2.8 in. Wheels (chrome) (front) (2)
Suggested retail price $8.00

Part #5572 Twin-Spoke 2.8 in. Wheels (chrome) (rear) (2)
Suggested retail price $8.00



 LIGHTWEIGHT DISHED WHEELS: These nylon wheels are lightweight and strong, which makes them perfect for racing. The dished wheels also repel dirt and mud and can be dyed any color.

Part #1974 Lightweight dished wheels (front)
Suggested retail price $5.00

Part #1972 Lightweight dished wheels (rear)
Suggested retail price $5.00


 Low Mass Metal Constant Velocity Driveshafts: For the hardcore racer, Jato has available these trick metal driveshafts. They concentrate the mass for less overall rotational mass than the stock Jato driveshafts. This results in even quicker acceleration. The outside U-joint is lubricated and sealed by a rubber boot to protect it from dirt and grime. The U-joint pins are held captive by the ball bearings so you never have to worry about losing a pin. Computer-aided design permitted Traxxas engineers to design these shafts to handle the extreme articulation generated by Jato’s increased suspension travel. On Jato there is less than 1mm of total dogbone plunge over the entire range of suspension travel. Unlike conventional metal shafts, the Traxxas metal CV shafts do not require you to limit your suspension travel. These are simply the most advanced metal CV driveshafts available.

Part #5551X
Low Mass Metal Constant Velocity Driveshafts
Suggested retail price $50.00




 Jato Accessory Aluminum Turnbuckles: Traxxas’ new aluminum turnbuckles make it possible for R/C hobbyists to dress up their Jato™ and save weight at the same time! These turnbuckles come in a brilliant, fire-red anodized finish and include a 5mm aluminum wrench that prevents marring the finish. Traxxas aluminum turnbuckles save almost 19 grams over the stock steel turnbuckles and are 35% lighter than titanium. Traxxas manufactures these turnbuckles from high-grade 7075-T6 aluminum to provide ample bending stiffness.

Part #5539X
Suggested retail price $34.00

#5511R


#5511X
 Jato 3.3 ProGraphix Body: Traxxas' Ready-to-Race® Jato comes with a fully trimmed, five-color ProGraphix® painted body. Traxxas' unique ProGraphix painting process creates crisp, clean lines, smooth fades and amazing professional graphics. Very little painting is required. Just add a splash of color and you can start racing faster while looking better than ever!

Part #5511R Jato 3.3 ProGraphix Body (replacement for the painted body)
Suggested retail price $34.99

Part #5511X Jato ProGraphix Body (replacement for the painted body)
Suggested retail price $34.99
Jato ProGraphix Body: Perfect for those who want to create their own custom paint job. These bodies are made from .040 inch Lexan for extra ruggedness.

Part #5511 Jato Body (clear, requires painting)
Suggested retail price $25.00
Official Team Traxxas Racing Decals: The official Team Traxxas Racing decal sheet has been revised and now includes logos for TRX® Engines, Top Fuel™, Extreme Power, www.Traxxas.com, and a 7 3/4" Traxxas logo for your toolbox. Perfect for adding that “final touch” to your Traxxas ProGraphix painted body, or your own personal painting schemes. 8 1/2" x 11"

Part #9950 Official Team Traxxas Racing Decals
Suggested retail price $4.50
Racing Sponsors Decal Sheet: Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker headers. The decal sheet also includes various Traxxas logos including the popular TRAXXAS.COM decals. All the logotypes are faithfully produced and are fully licensed. 9" x 4 1/2"

Part # 2514 Racing Sponsors
Decal Sheet
Suggested retail price $3.00
Single Speed Conversion Kit: With Jato’s extreme performance capability and huge arsenal of tuning possibilities, it’s a natural for the race track. Certainly Jato’s 2-speed is going to give you an edge however, Traxxas offers this single-speed conversion to make Jato legal for ROAR sanctioned racing. Removing the 2-speed reduces overall weight and lessens the rotational mass inside the transmission. Installation is simple.

Part #5593X
Single Speed Conversion Kit
Suggested retail price $10.00
Sway Bar Kit: Jato is designed to be able to use sway bars. All the mounts and connectors are already integrated into the suspension arms and bulkheads. Installation is a snap. Sway bars reduce chassis lean and tighten up the handling response on smooth fast tracks or when you’re just running flat out on paved road courses or parking lots. A little extra stability can make the difference if you’re all about pushing Jato to its nearly 60mph top speed as often as possible.

Part #5589 Sway Bar Kit
Suggested retail price $19.50
Steering Blocks: Traxxas aluminum steering blocks for Jato add both strength and beauty to the front suspension. They are machined from tough 6061-T6 aluminum for superior durability, and then finished in brilliant titanium-anodizing for a serious, high-tech performance look. The neutral titanium-anodizing color will match well with other colors and aftermarket components on the model. The aluminum steering blocks (part 5536R) may be used with either the 30-degree (part #5532X) or 25-degree (5536X) aluminum caster block set. They are specially designed to maintain Jato’s zero bump steer geometry.

Part #5536R
Suggested retail price $28.00
Caster Blocks: Traxxas aluminum caster blocks for Jato add both strength and beauty. They are machined from tough 6061-T6 aluminum for superior durability, and then finished in brilliant titanium anodizing for a serious, high-tech performance look. The neutral titanium anodizing color will match well with other colors and aftermarket components on the model. They are available in 25-degree or 30-degree pairs. The 30-degree caster blocks are replacements for the stock Jato caster blocks. The 25-degree aluminum caster blocks can be used to increase stability and make Jato easier to drive on ovals and other long, fast tracks. The caster blocks are marked with a “25” or “30” for easy identification. The aluminum caster blocks require the matching composite steering blocks part 5532 (30-degree) or part 5536 (25-degree). The aluminum steering blocks (part 5536R) may be used with either aluminum caster block set.

Part #5532X
30-degree
Suggested retail price $38.00

Part #5536X
25-degree
Suggested retail price $38.00
6061-T6 ALUMINUM STUB AXLE CARRIERS: These special stub axle carriers give you total control of your Jato without sacrificing speed! The lightweight, titanium-anodized carriers remove rear-wheel toe-in to “loosen” the rear end, allowing the Jato to blow the doors off the competition on the straightaways and power-slide through the corners.

Part #5555X Carriers, stub axle, (rear)
Suggested retail price $40.00
30mm STEEL FLYWHEEL: The 30mm flywheel is made of hardened, ground steel – perfect for a Jato with a starter box! The flywheel easily accommodates both small-and big-block engines. The specially cut edge pattern increases traction against starter box wheels.

Part #4142R Flywheel, 30mm steel (w/pins)(TRX 2.5/ TRX 2.5R) (use with lower engine position and starter box on Jato)
Suggested retail price $7.50
Billet Front Wheel Spindles: Traxxas’ new lightweight aluminum, front wheel spindles replace the stock steel spindles to reduce unsprung weight and make the head-turning Jato look even sharper! These blue-anodized spindles have a definite performance look and weigh only 1.73 grams each– 36% less than the stock steel spindles! These wheel spindles are machined from strong 7075-T6 billet aluminum for durability.

Part #5537X
Suggested retail price $11.00
BLUE-ANODIZED TIE BARS: These tie bars strengthen your Jato’s rear bulkhead and suspension arms. They also allow you to adjust the rear-wheel toe-in so your Jato can fly down the straightaways and power-slide through the corners.

Part #5557 Tie bars (rear) (3 & 5-degree toe adjustment)
Suggested retail price $5.00
STEERING DRAG LINK: These aluminum drag links are blue-anodized to make your Jato look even sharper. Experienced R/C racers adjust their drag links – the bars between the steering bellcranks – to ensure an ultra-smooth ride.

Part #5542X Drag link, machined 6061-T6 aluminum (blue-anodized)/ 5x8x2.5 ball bearing (2)
Suggested retail price $17.50
HEX WHEEL HUBS: Not only are these aluminum hex wheel hubs as tough as nails, they’re blue-anodized to make your Jato look even sharper! Traxxas machines them for the highest precision and incredible detail.

Part #1654X Wheel hubs, hex (blue-anodized, light-weight aluminum) (2)/ axle pins(2)
Suggested retail price $9.00
5mm BLUE-ANODIZED FLANGED LOCK NUTS: Lightweight and great looking, these blue-anodized aluminum flange lock nuts are the perfect finishing touch for your truck.

Part #4147X 5mm Blue-Anodized Flanged Lock Nuts (4)
Suggested retail price $6.00

Part #1747X 4mm Blue-Anodized Flanged Lock Nuts (4)
Suggested retail price $5.00
HOLLOW BALL SET: With the understanding that a gram of weight can be the difference between winning and losing a race, Traxxas hollows these steering linkage ball bearings for your Jato. While reducing the weight, the hollow ball bearings maintain the original tightness in the rod ends.

Part #5355X Hollow ball set, aluminum (30)/ tall centered hollow ball (2)/ tall offse hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
Suggested retail price $29.50
SERVO HORNS: Traxxas designs these special servo horns to maximize the performance of your Jato’s steering and throttle linkages. These servo horns are also compatible with Hitec, JR, KO and Airtronics servos.

Part #5545X Servo horns, steering and throttle (for non-Traxxas servos (Hitec, JR, KO, Airtronics))
Suggested retail price $6.00
ALUMINUM BALL STUDS: Not only will these aluminum ball studs make your Jato look even sharper, they’re much lighter than stock steel ball studs. The hard-anodized ball studs feature a special Teflon® coating that limits friction to make your Jato’s suspension arms pivot as smoothly as possible.

Part #5529X Ball studs (use for inner camber link mounting)
Suggested retail price $10.00
DUST BOOT: These rubber dust boots seal and protect your Jato’s shock shafts from dust, water, mud, or anything else that might keep your 1/10-scale, nitro-powered, off-road racing truck from blowing the doors off the competition.

Part #5464 Dust boot, shock (1 pair)
Suggested retail price $3.00
SUSPENSION DOWN STOP SCREWS: All R/C off-road racers want as much ground clearance as possible, and that’s exactly what your Jato will get with these suspension down stop screws. You control your suspension’s down travel by simply adjusting the screws. These screws set your Jato’s maximum ride height and limit suspension droop.

Part #5554 Suspension down stop screws (includes 3mm drill bit)
Suggested retail price $4.50
HARD-ANODIZED TEFLON®-COATED GTR™ SHOCK BODIES: Hard-anodized and Teflon®-coated aluminum shock bodies reduce internal friction for smoother shock performance. The hard-anodizing makes the contact surfaces more durable for longer life.

Part #5466X Body, GTR shock (hard-anodized, Teflon-coated aluminum) (1)
Suggested retail price $10.00
TITANIUM NITRIDE SHOCK SHAFTS: Traxxas coats these hardened, ground steel shafts with titanium nitride (TiN) to give your Jato long-lasting shock shaft life. The micro-polished finish reduces static friction to a minimum for a smooth ride and high performance.

Part #5463T Shaft, GTR shock TiN-coated (2)
Suggested retail price $10.00
HARD-ANODIZED TEFLON®-COATED GTR™ SHOCKS: Jato’s GTR shocks can be upgraded for smoother, longer-lasting performance with this fully assembled shock set. The hard-anodized, Teflon®-coated aluminum bodies provide the smoothest finish possible that’s extra tough for long wear. Titanium nitride (TiN) coating on the shafts provides an incredibly smooth and durable finish. These shocks feature the same threaded shock bodies and spring pre-load adjusters, volume compensating rubber diaphragms, and low-friction X-ring seals as standard GTR shocks. The kit includes four fully assembled shocks without springs.

Part #5460X Shocks, GTR hard-anodized, Teflon-coated bodies with TiN shafts (assembled) (4)
Suggested retail price $80.00

Part #5460 Shocks, GTR aluminum (assembled) (2) (without springs)
Suggested retail price $32.00
GTR™ SPRINGS: Traxxas offers a wide variety of spring rates for the GTR shocks to precisely compensate for lighter or heavier truck configurations. The springs use high-quality spring steel with durable powder-coated finishes. Spring rate is indicated by colored dots on the end of the spring.

Part #5427 Spring, shock (GTR) (front 0.7 yellow) (one pair)    
Suggested retail price $5.00

Part #5428 Spring, shock (GTR) (front) (0.9 rate orange) (one pair)    
Suggested retail price $5.00

Part #5432 Spring, shock (GTR) (front) (1.3 rate gold) (one pair)    
Suggested retail price $5.00

Part #5429 Spring, shock (GTR) (rear) (1.0 rate tan) (one pair)    
Suggested retail price $5.00

Part #5431 Spring, shock (GTR) (rear) (1.2 rate silver) (one pair)    
Suggested retail price $5.00

Part #5434 Spring, shock (GTR) (rear) (1.6 rate blue) (one pair)    
Suggested retail price $5.00
RECOIL PULL STARTER FOR TRX® 3.3/2.5: Use the TRX 2.5 recoil pull starter for racing applications where weight savings are critical. It’s all new and engineered for long-lasting, trouble-free operation. It includes a heavy-duty spring and cord. Installation requires the starter backplate (#5274) and starter shaft (#5277) (EZ-Start equipped motors already have these parts installed). If the engine was not originally equipped with a starter, a different crankshaft is also required. Use Traxxas part 5219 (IPS) or 5221 (multi-shaft) crankshaft.

Part #5170 Recoil Pull Starter for TRX 3.3/2.5
Suggested retail price $20.00

Part #5219 Crankshaft, IPS (for engines w/starter)
Suggested retail price $36.00

Part #5221 Crankshaft, multi-shaft (for engines w/starter)
Suggested retail price $40.00
TRAXXAS TOP FUEL™: The new, reformulated blend is made specifically for TRX® Racing Engines and improves the life of Pro.15 engines as well. Top Fuel uses superior natural and synthetic lubricants in just the right amount to deliver the crisp, clean throttle response and screaming top-end performance you want in a car fuel, without sacrificing long-term durability. It’s the only fuel that’s 100% Traxxas certified.

Part #5010 Traxxas Top Fuel 10% (quart)
Suggested retail price $10.25

Part #5020 Traxxas Top Fuel 20% (quart)
Suggested retail price $11.99

Part #5030 Traxxas Top Fuel 33% (quart)
Suggested retail price $13.99

Part #5060 Traxxas Top Fuel 10% (gallon)
Suggested retail price $29.99

Part #5070 Traxxas Top Fuel 20% (gallon)
Suggested retail price $33.99

Part #5080 Traxxas Top Fuel 33% (gallon)
Suggested retail price $38.99

Air Filter Oil: The formula for Traxxas air filter oil is specially made for filtration, not lubrication. It's extra-sticky to trap extremely small particles of dust and dirt in the foam element. Traxxas air filter oil is much more effective than standard oils which were never intended to be used for filtration.

Part #5263 Air Filter Oil
Suggested retail price $4.99