Traxxas Lifetime Engine
Replacement Plan

- Exchange a worn out Traxxas engine for a brand new TRX® Racing Engine; it’s an affordable, convenient, no-questions-asked program.
- Exchanges can be made in your local hobby shop or directly through Traxxas.
- It’s less expensive than rebuilding the engine with separate parts.
- Know that it’s done right. Traxxas replacement engines are brand new (not refurbished) for factory-fresh performance.
- The program uses our top-of-the-line TRX Racing Engine for all exchanges.

Learn More About it!

Center Differential

The optional center differential can be installed on Revo 2.5R* or 3.3 to help balance the distribution of power to reduce front end lift on acceleration and improve steering responsiveness.

Part #5414
Differential kit, center
(Complete for Revo)
(assembled with 100K oil)
Requires forward-only conversion (included)
Suggested retail price $ 39.00

*Requires short-rear output shaft, part #5416, for use with Revo 2.5R standard chassis.

Part #5416
Gear, differential output
Suggested retail price $ 6.00

Rear Brake Kit

Combine the optional center differential with the Revo dual rear brake kit to allow precise tuning of the front to rear brake bias. It's factory engineered to match Revo's top level performance and durability.

Part #5417 Rear Brake Kit
(dual-disc Revo)

Note: Requires center differential kit part #5414 and gearbox halves part #5391X. Extended chassis (#5322X) is recommended for installation.
Suggested retail price $ 19.00

Vented Steel Brake Disc

Revo already delivers class-leading braking performance, but this high performance vented steel brake disc takes it even further. This brake disc not only provides increased stopping power, but its ability to dissipate more heat delivers consistent braking that racers can depend on during those long A-main racing events.

Part #5364X Brake disc (high performance, vented)
Suggested retail price $19.95

SPLIT-SPOKE 3.8" CHROME WHEELS: (2) (fits Revo/Maxx series)

Part #5172X Split-Spoke 3.8'' Chrome Wheels, (2) (fits Revo/Maxx series)
Suggested retail price $11.00
SPLIT-SPOKE 3.8" SATIN-FINISH WHEELS: (2) (fits Revo/Maxx series)

Part #5172 Wheels, Split-Spoke 3.8'' (satin) (2) (fits Revo/Maxx series)
Suggested retail price $10.00
MIRROR CHROME HURRICANE™ WHEELS:
These beautiful hurricane wheels offer a unique, high-tech style and are sized to mount the new low-profile Revo spec tires. The horizontal bead helps grab the tire, reducing the stress placed on the glue joint by tire expansion. The tire bead is left unchromed for fast, easy tire gluing.

Part #5373 Wheels, Hurricane 3.8" (chrome) (2) (also fits Maxx series)
Suggested retail price $11.00

Maxx 3.8'' Chevron Tires MAXX 3.8" CHEVRON TIRES: Official Maxx™ Chevron tires are 3.8" inches of soft compound rubber. The wide, low profile design provides excellent off-road handling and reduced weight.

Part #5171 Maxx 3.8'' Chevron Tires, (2) (fits Revo/Maxx series)
Suggested retail price $30.00
SPORTTRAXX™ TIRES:
The original, proven, SportTraxx tire design is available in a low-profile size to fit standard 3.8” Revo wheels. They feature a super soft rubber compound with a directional and asymmetrical tread pattern. The aggressive, multi angled square spikes provide many sharp, gripping edges. There is a left and right tire in each package. Rotation direction changes depending on whether each tire is mounted in the front or the rear. High tech foam inserts complete the package for optimum traction and handling. The total weight savings when the stock tires are replaced with SportTraxx tires is 124 grams.

Part #5470 Tires, SportTraxx racing 3.8" (soft compound, directional and asymmetrical tread design)/ foam inserts (2)
Suggested retail price $35.00

RESPONSE™ RACING TIRES:
Response tires are true thoroughbred racing tires. The short rectangular spikes offer tremendous traction on hard packed “blue groove” tracks. The tires are narrower in width to reduce the rotating mass and greatly improve acceleration and responsiveness. The soft compound combined with the included foam inserts makes for a winning combination. The total weight savings when the stock tires are replaced with the Response racing tires is 305 grams.

Part # 5471 Tires, Response racing 3.8" (soft-compound, narrow profile, short knobby design)/ foam inserts (2)
Suggested retail price $30.00

TRX 3.3 PowerTune™ Head

TRX® 3.3 POWERTUNE™ COOLING HEAD: The giant Powertune machined aluminum cooling head promotes even heat distribution for stable engine temps and rock-solid tuning consistency. The newly designed molded head protector is securely fastened to the top of the head with precision hex screws.

Part #5238R: TRX 3.3 PowerTune™ Cooling head, (machined aluminum, blue- anodized), head protector (1), 3x6mm CCS (5)
Suggested retail price $45.00

TRX® 3.3 HEAD PROTECTOR: The impact resistant head protector is secured to cylinder head with screws so it won't fall off. It's designed to absorb harsh impacts and to protect your cylinder head from rollovers.

Part # 5228 TRX 3.3 Head Protector, cooling head (1)/3x6mm CCS (5) (TRX 3.3)
Suggested retail price $3.00

TRX Power Charger TRX® POWER CHARGER: The TRX Power Charger, makes fast charging (in about an hour) as simple as just plugging it in. Peak detection ensures a perfect charge, everytime. For use with Traxxas RX Power Packs. Now charges your 7.2V EZ-Start battery!

Part #3030X TRX Power Charger, peak detecting/ AC adapter (for charging NiCad or NiMH 5-cell receiver packs and 6-cell (7.2V) EZ-Start packs) (includes plug adapter for 7.2V packs)
Suggested retail price $40.00

 

DC Power Adapter
Plug this DC power adapter into any 12V automotive auxiliary power socket and you can operate your TRX Power Charger in the field. The 48” power cord allows safe charging outside of the vehicle. The built-in fuse protects against short circuits.

Part #3032 Power adapter, DC
Suggested retail price $7.50

Extended Wheelbase Arms

Add an additional 10mm or 19mm of wheelbase extension to Revo in just minutes! Traxxas makes it easy by building the adjustment into the rear arms. Installation is a snap and the wheelbase can be quickly tuned trackside for any conditions. Select either 10mm or 19mm of extension by simply repositioning the pivot ball locations.

Part #5333R
Suspension arm set, adjustable wheelbase (lengthens wheelbase 10mm or 19mm) (suspension arm upper (2)/ suspension arm lower (2)/ bumper mount spacers (2)/ 4x16BCS (2))
Suggested retail price $ 16.00

Part #5327
Suspension arms, adjustable wheelbase right side (upper arm (1)/lower arm (1))
Suggested retail price $ 7.50

Part #5328
Suspension arms, adjustable wheelbase left side (upper arm (1)/lower arm
Suggested retail price $ 7.50

Part #3933
4x16 Button-head Cap Screws
Suggested retail price $ 2.50

Resonator™ Dyno-Tuned Performance Pipe for Revo

The Traxxas Resonator aluminum tuned pipe for Revo is specifically engineered to fit right in the chassis and compliment Revo’s TRX 2.5R and TRX 3.3 racing engine. It’s the ultimate Revo musclepipe! The single-chamber design dramatically increases bottom-end punch by nearly 20% between between 10,000 and 15,000rpm, and continues to pull strong with a 10% increase from 15,000 to 30,000rpm. It’s perfect to provide that extra snap of acceleration off the line. The Traxxas engineering team knows TRX Racing Engines better than anyone so a Resonator pipe delivers dyno-proven results that drivers can see, hear, and feel every time they pull the trigger. Each Resonator pipe is fully polished by hand to a beautiful mirror-chrome finish with a laser-etched logo. Mounting hardware is included.

Part #5490
Tuned pipe, Resonator (aluminum, single-chamber, enhances low to mid-rpm engine power) bright polished finish, includes pressure fitting/4mm GS (fits Revo with TRX Racing Engines)
Suggested retail price $ 50.00
Pipe Coupler
This pipe coupler and exhaust deflector are the same items installed originally on Revo, only they’re molded in black to improve the look when a pipe color other than the stock blue is used.

Part #5245X Pipe coupler, molded (black)/ Exhaust deflector (rubber, black)/ cable ties, long (2)/ cable ties, short (2)
Suggested retail price $4.00

Revo 3.3 Prographix® Custom Body
From mild to wild, choose your own color and personalize your body. The detailed graphics are fully painted, but the rest of the body is clear, so you can choose your own main body color. Simply grab a can of paint and spray the final color. It's easy for anyone to get instant, professional results. The bodies are completely trimmed and include the body post holes for easy installation on the chassis.

Part #5312X Revo 3.3 ProGraphix Replacement Body/window, grill, lights decal sheet
Suggested retail price $34.99

Revo 3.3 Body Unpainted (Clear)
If your looking to personalize your Revo 3.3 with your own custom paintwork, then here’s where to start. This clear Revo 3.3 body is molded from .040 inch thick Lexan for extra durability.

Part #5312 Body, Revo 3.3 (clear, requires painting)/window, grill, lights decal sheet
Suggested retail price $25.00

Official Team Traxxas Racing Decals: The official Team Traxxas Racing decal sheet has been revised and now includes logos for TRX® Engines, Top Fuel™, Extreme Power, www.Traxxas.com, and a 7 3/4" Traxxas logo for your toolbox. Perfect for adding that “final touch” to your Traxxas ProGraphix painted body, or your own personal painting schemes. 8 1/2" x 11"

Part #9950 Official Team Traxxas Racing Decals
Suggested retail price $4.50
Revo Differential Spool

This differential spool replaces the Revo differential gears. The spool locks the axle, providing equal power to both wheels. For straight-line sand drags, rock climbing, or pulling, you can replace both the front and rear differentials with spools for total 4WD traction. On tight off-road tracks, install a spool in the rear diff case to allow the rear end of the truck to rotate more easily and slide through the corners. Corrosion-resistant finish and tough steel construction ensures lasting durability.

Part #5381X
Spool, differential (eliminates differential, use off-road only)
Suggested retail price $ 12.00








 TUBES™ Lightweight Aluminum Turnbuckles:
Traxxas innovation strikes again with the introduction of Tubes aluminum turnbuckle toe links for Revo. Traxxas Tubes are 30% lighter than the stock steel toe links, plus they’re 4-times stiffer and more than double the strength of aftermarket titanium! Simply put, these are the strongest toe links you can buy for your Revo. The secret is in the unique patent-pending hollow tube design that maximizes stiffness and resistance to bending, while at the same time reducing weight. Plus, the beefy size tells everyone your Revo means business. Traxxas Tubes are manufactured from high-grade 7075-T6 aluminum and anodized brilliant fire red. To prevent marring the finish, a metric aluminum wrench is included for adjustment. The broad center nut makes it easy to line up the wrench for fast, trackside tuning. A handy machined groove on one end easily identifies the left hand threads.

Part #5338R
Suggested retail price $25.00




 Big Block Installation Kit:
The Revo big block installation kit makes it easy to bolt primal big block engine torque into the high-tech Revo. Just imagine having the most suspension travel available in any monster truck, combined with the big block engine of your choice. No matter which big block you choose, Revo’s low center of gravity, lightweight, and efficient drivetrain means you’ll get the most performance out of every ounce of horsepower you put in. The big block installation kit includes all the components and hardware necessary for a factory engineered, quality installation.

Some big block engines are easier to install than others. Some will not accommodate pull starters. Click here for full details >>

Part #5360X Big Block Installation Kit
Suggested retail price $55.00

 

40mm Aluminum Flywheel
This new, light weight, silver anodized machined aluminum flywheel is 40mm in diameter, perfect for using a starter box with the Revo. The pattern on the edge is specially cut to increase traction against starter box wheels. Use the flywheel with small or big block engines.

Part #4142X 40mm Aluminum Flywheel
Suggested retail price $10.00

Hard-Anodized Pivot Balls
These trick, hard-anodized 7075-T6 aluminum pivot balls are considerably lighter than the stock steel pivot balls.The hard-anodized pivot balls feature a special Teflon®-coating that reduces friction to make the suspension arms pivot as smooth as possible. The pivot balls are sold in 4-packs that include 4 molded bushing caps (not shown). Each package of 4 pivot balls will reduce the vehicle’s weight by 19-grams. Two packages will remove over 1-ounce of unsprung weight!

Part #4933X Hard-anodized Pivot Balls
Suggested retail price $20.00

Spur Gears
Optional Traxxas Revo spur gears allow you to increase or decrease the final drive ratio and tune for different applications. The out-of-the-box spur gear is a 38-tooth.

Part #3953 Spur gear, 36-tooth (1.0 module (metric) ).
Suggested retail price $3.00

Part #3954 Spur gear, 38-tooth (1.0 module (metric) ).
Suggested retail price $3.00

Part #3955 Spur gear, 40-tooth (1.0 module (metric) ).
Suggested retail price $3.00

Diff Lube
Traxxas performance diff lubes make it easy to increase or decrease the limited slip action of the Revo gear differential. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. Each diff lube weight can be purchased separately as well. Revo is equipped out of the box with 30K W differential oil.

Part #5136X Differential oil kit (1 each: 10K, 30K, 50K weights).
Suggested retail price $21.00

Part #5135 Oil, differential (10K weight).
Suggested retail price $7.50

Part # 5136 Oil, differential (30K weight).
Suggested retail price $7.50

Part #5137 Oil, differential (50K weight).
Suggested retail price $7.50

Steel Clutch Bells
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust Revo’s final drive ratio for added tuning benefits. The out-of-the-box clutch bell gear is a 15-tooth.

Part #5214 Clutch bell (14-tooth) /5x8x0.5 mm fiber washer (2)/ 5mm E-clip (requires 5x10x4mm ball bearings part #4609).
Suggested retail price $12.00

Part #5215 Clutch bell (15-tooth) /5x8x0.5mm fiber washer (2)/ 5mm
E-clip (requires 5x11x4mm ball bearings part #4611).
Suggested retail price $12.00

Part #5216 Clutch bell (16-tooth) /5x8x0.5mm fiber washer (2)/ 5mm
E-clip (requires 5x11x4mm ball bearings part #4611).
Suggested retail price $12.00

5217 Clutch bell (17-tooth) /5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
Suggested retail price $12.00

Push Rods
Revo’s linkage based suspension requires different push rod assemblies depending upon which rockers are used. Strong, 7075-T6 aluminum versions of each are available to decrease the total weight of the truck by 31 grams. Rod ends are already installed making it simple to just bolt them on the truck. When using progressive-2 rockers, spacers (part # 5133) are required for use with the 5318 or 5318X push rods. These spacers are included with the progressive-2 rockers.

Part #5318 Push Rod (steel) (2) (chrome) (use with long travel or #5357 progressive-1 rockers)
Suggested retail price $7.00

Part #5318X Push Rod (aluminum) (red) (2) (use with long travel or #5357 progressive-1 rockers)
Suggested retail price $10.00

Part #5319 Push Rod (steel) (2) (black) (use with #5359 progressive-3 rockers)
Suggested retail price $7.00

Part #5319X Push Rod (aluminum) (red) (2) (use with #5359 progressive-3 rockers)
Suggested retail price $10.00

Accessory Servo Horns
Revo requires specially designed servo horns to maximize the performance of the linkages. The factory servo horns are compatible with Futaba style servo drives. Racers who choose to run non-Traxxas servos will appreciate the convenience of these servo horns, made just for Hitec, JR, KO, and Airtronics brands.

Part #5345X Servo horns, steering and throttle (for non-Traxxas servos)
Suggested retail price $10.00

Aluminum Rocker Posts
Aluminum rocker posts save 16 grams over the stock steel rocker posts without sacrificing strength. They’re a great addition to any Revo that’s being trimmed out for the track.

Part #5354X Rocker post (aluminum) (4)
Suggested retail price $12.50

Aluminum Hollow Balls
By design, Revo is equipped with multiple linkages and numerous rod ends with steel hollow balls. The weight can really add up when you combine them all. This set of aluminum hollow balls will reduce that weight by 12 grams and maintain the original factory tightness in the rod ends.

Part #5355X Hollow ball set, aluminum Revo (30)/ tall centered hollow ball (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
Suggested retail price $29.50

Progressive Rate Rockers
The key to Revo’s suspension performance is the progressive geometry built into the rockers. Decreasing progressive rate from the stock progressive-2 rockers or adding long travel progressive-3 rockers is as simple as bolting on a new set. Progressive-3 is even more progressive to further reduce body lean and brake dive and provide the most responsive handling.

Part #5357 Rocker arm set, progressive-1 (90-T)/ spacers (red aluminum) (8)
Suggested retail price $8.00

Part #5359 Rocker arm set, progressive-3 (90-T) (requires pushrods part #5319 or 5319X).
Suggested retail price $8.00

Close and standard 2-Speed Gearsets
Only Revo offers the ability to custom tailor the 2-speed gear ratios for either wide or close ratio gear shifts. The close ratio set reduces the engine’s RPM change between first and second gear for nearly seamless shifting and speed, even in the corners! Choose wide ratio gear set to allow Revo to run in first gear longer through the infield, shifting later for a big run down the straightaway.

Part #5383 Gear set, 2-speed close ratio (2nd speed gear 40T, 13T-16T input gears, hardware) and standard
Suggested retail price $7.50

Part #5384 Gear set, 2-speed wide ratio (2nd speed gear 38T, 13T-18T input gears, hardware)
Suggested retail price $7.50

Forward Only Conversion Kit
The forward only conversion kit makes Revo legal for racing where reverse is not allowed. It reduces the internal rotating mass in the transmission for quicker acceleration and provides a small, additional weight reduction by eliminating the OptiDrive module, and the micro servo and linkage. When the transmission is fitted with the forward only conversion kit, the weight of the transmission is reduced by either 61 grams (when using the aluminum output shaft) or 48 grams (when using the optional steel output shaft).

Part #5394X Forward only conversion kit (eliminates reverse)
Suggested retail price $12.50

GTR™ Springs
Traxxas offers a wide variety of spring rates for the GTR shocks to precisely compensate for lighter or heavier truck configurations and different rocker installations. The springs use high-quality spring steel with durable powder-coated finishes. Spring rate is indicated by colored dots on the end of the spring.

Part #5435 Spring, shock (GTR) (2.6 rate yellow)
Suggested retail price $6.00

Part #5436 Spring, shock (GTR) (2.9 rate white) (std. front 90mm)
Suggested retail price $6.00

Part # 5437 Spring, shock (GTR) (3.2 rate orange)
Suggested retail price $6.00

Part #5438 Spring, shock (GTR) (3.5 rate green) (std. rear 90mm)
Suggested retail price $6.00

Part #5439 Spring, shock (GTR) (3.8 rate gold)
Suggested retail price $6.00

Part #5440 Spring, shock (GTR) (4.1 rate tan)
Suggested retail price $6.00

Part #5441 Spring, shock (GTR) (4.4 rate black)
Suggested retail price $6.00

Part #5442 Spring, shock (GTR) (4.9 rate silver) (std. front 120mm)
Suggested retail price $6.00

Part #5443 Spring, shock (GTR) (5.4 rate pink)
Suggested retail price $6.00

Part #5444 Spring, shock (GTR) (5.9 rate blue) (std. rear 120mm)
Suggested retail price $6.00

Part #5445 Spring, shock (GTR) (6.4 rate purple)
Suggested retail price $6.00

Hard Anodized Teflon®-Coated GTR Shocks
Revo’s GTR shocks can be upgraded for smoother, longer lasting performance with this fully assembled shock set. The hard-anodized, Teflon®-coated aluminum bodies provide the smoothest finish possible that’s extra tough for long wear. Titanium Nitride (TiN) coating on the shafts provides an incredibly smooth and durable finish. These shocks feature the same threaded shock bodies and spring pre-load adjusters, volume compensating rubber diaphragms, and low-friction X-ring seals as standard GTR shocks. The kit includes 4 fully assembled shocks without springs.

Part #5460X Shocks, GTR hard-anodized, Teflon®-coated bodies with TiN shafts (assembled) (4)
Suggested retail price $80.00

Titanium Nitride Shock Shafts
Improve the performance and durability of the stock GTR aluminum shocks by installing Titanium Nitride (TiN) coated shafts. The TiN coating makes the shafts harder and smoother for better resistance to scratching, smoother performance, and longer seal life.

Part #5463T Shaft, GTR shock TiN-coated (2) Hard-Anodized, Teflon®-Coated
Suggested retail price $10.00

GTR™ Shock Bodies
Hard-anodized and Teflon®-coated aluminum shock bodies reduce internal friction for smoother shock performance. The hard anodizing makes the contact surfaces more durable for longer life.

Part #5466X Body, GTR shock (hard-anodized, Teflon®-coated aluminum) (1)
Suggested retail price $10.00

TRAXXAS TOP FUEL™: The new, reformulated blend is made specifically for TRX® Racing Engines and improves the life of Pro.15 engines as well. Top Fuel uses superior natural and synthetic lubricants in just the right amount to deliver the crisp, clean throttle response and screaming top-end performance you want in a car fuel, without sacrificing long-term durability. It’s the only fuel that’s 100% Traxxas certified.

Part #5010 Traxxas Top Fuel 10% (quart)
Suggested retail price $10.25

Part #5020 Traxxas Top Fuel 20% (quart)
Suggested retail price $11.99

Part #5030 Traxxas Top Fuel 33% (quart)
Suggested retail price $13.99

Part #5060 Traxxas Top Fuel 10% (gallon)
Suggested retail price $29.99

Part #5070 Traxxas Top Fuel 20% (gallon)
Suggested retail price $33.99

Part #5080 Traxxas Top Fuel 33% (gallon)
Suggested retail price $38.99
Heavy Duty Servo Saver Spring
For use with metal gear servos, this heavy duty servo saver spring provides protection to metal gear servo drivetrains while providing crisp steering response.

Part #5344X Revo Servo Saver Spring, heavy-duty
Suggested retail price $2.50

Air Filter Oil
The formula for Traxxas air filter oil is specially made for filtration, not lubrication. It's extra-sticky to trap extremely small particles of dust and dirt in the foam element. Traxxas air filter oil is much more effective than standard oils which were never intended to be used for filtration.

Part #5263 Air Filter Oil
Suggested retail price $4.99