TRI10017   Trinity   D6 Motor 11T Double Flat Wire

TECH NOTES
            This is the Trinity D6 11 Turn Double Wind motor.

FEATURES: Handwound D6 "skewed" armature for more power
          Monster Flatwire for higher saturation of armature for greater power
          Lower motion of inertia for faster wind-up, more punch, & more torque
          Epoxy balanced armature, diamond trued commutator
          Silver soldered commutator tabs for lower resistance
          P-94 dual shunt pro brushes carry more current
          Up to 4 times longer brush life over standard sized brushes
          EPIC binary 2.four, 4 magnet system for more power
          3 hard wired surface mount capacitors
          Dual ball bearings
          Motor is tweaked and dyno tuned (dyno reading is labeled on motor can)
          Brush heatsinks

INCLUDES: One D6 series motor
          One pair of extra brushes (TRIC5444)
          One instructions sheet

REQUIRES: Motor leads and connector of your choice
          Assembly into model following original kit manual
          Pinion gear of your choice

SPECS:    Length: 2.22" (56mm) (not including the motor shaft)
          Can diameter: 1.42 " (36.10mm)
          Shaft diameter: 1/8"

COMMENTS: Replacement brushes -         TRIC5444
          Replacement springs -         TRIC5533
          Replacement brush heatsinks - TRIC1405
          Optional motor heatsink -     TRIC1405

| Homepage | R/C Cars | Stock Parts | Optional Parts | Batteries | Bearings | Body Accessories | Books & Simulators |
| Chargers | Decals | Electronic Speed Controls | Engines | Engine Parts | Fuel | Glow Plugs | Glue |
| Supplies & Accessories | Hobby Supplies | Lexan Bodies | Motors Electric | Nuts & Bolts |
| Paint, Lexan | Radios | Radio Accessories | Servos | Tires & Wheels |
| Tools | Tools Specialized | Search |