TRIRC2140   Trinity   Monster Horsepower Stock Motor  

TECH NOTES
           This is Trinity's Monster Horsepower Stock Electric Motor.
                 This can be used in off-road/on-road kits.

FEATURES: All new armature lamination design that fools the motor into thinking
            it has more then the legal 24 degrees of timing.
          The lighter armature also has quicker acceleration then previous high
            RPM armature designs.
          It has an asymmetrical hole pattern to alter the magnetic field for
            more magnetic timing. Magnets are centered with tabs for a more
            consistency motor to motor.
          Copper hoods, heat sinks, brush stabilizing system and external
            circuit board caps are all standard.
          ROAR spec 27 turn, 24 degree locked timing motor.
          The Monster Stock also uses the same external circuit board with hard
            wired capacitors as the D5. This eliminates any glitching problems
            from dirt getting under the heatsinks and the capacitor not making
            good contact. Capacitors are now visible so they are easier to
            inspect. This also makes taking the endbell apart and cleaning it
            easier as there are no little capacitors to lose.

INCLUDES: One Motor

REQUIRES: Motor leads (TRIC5500)

SPECS:    Length:   540 can size
          Diameter: 1/8" motor shaft

COMMENTS: For replacement brushes use RC4499 (TRIC5414), and for replacement
            springs use RC4398 (TRIC4398).

| Homepage | R/C Cars | Stock Parts | Optional Parts | Batteries | Bearings | Body Accessories | Books & Simulators |
| Chargers | Decals | Electronic Speed Controls | Engines | Engine Parts | Fuel | Glow Plugs | Glue |
| Supplies & Accessories | Hobby Supplies | Lexan Bodies | Motors Electric | Nuts & Bolts |
| Paint, Lexan | Radios | Radio Accessories | Servos | Tires & Wheels |
| Tools | Tools Specialized | Search |