TRU0375A   Tru Turn   Adapter Kit O.S. 1.08

TECH NOTES
   This is an Adapter Kit Used To Mount Tru Turn Aluminum Spinners Onto The:
             OS Max 1.08     Maloney 1.00 & 1.25     Brison - All
             Enya 2.40       Technopower - All

FEATURES: Steel Adapter Nut Screws Onto The Crankshaft Holding the Propeller
            On, Then A 10-32 Bolt Screws Into The Nut From Front, Holding The
            Spinner In Place.

INCLUDES: One Adapter Nut
          One Propeller Washer

REQUIRES: 9/16" End Wrench To Tighten
          Tru Turn Aluminum Spinner

SPECS:    Crankshaft Thread Size: 3/8" - 24 (approx, same as 10-24)
          Spinner Mounting Bolt Thread Size: 10-32

COMMENTS: No Bushing Is Required.
                                                                    

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |