TRU0835A   Tru Turn   Adapter Kit Zenoah G38

TECH NOTES
  This is an Adaptor Kit Used To Mount Tru-Turn Aluminum Spinners Onto The:
                            Zenoah G38 Engines.

FEATURES: This Bolt Replaces The Crankshaft End On The Zenoah Engine.  The Head
            Of The Bolt Has A Threaded Hole.  The Screw That Goes Through The
            Tip Of The Spinner Is Screwed Into The Hole At The End Of The Bolt.
            This Secures The Spinner And Prevents It From Coming Loose.

INCLUDES: One Adapter Bolt
          One Aluminum Bushing

REQUIRES: 1/2" Wrench To Tighten Bolt
          Tru Turn Spinner

SPECS:    Adapter Bolt Thread Size: 8 x 1.25 x 40mm
          Spinner Mounting Bolt Thread Size: 10-32
          Bushing Size: Inner: 8mm   Outer: 3/8"

COMMENTS: For the G45 & G62, use TRUQ3027.
          For the G23, use TRUQ4025.

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |